Procedure
1. During an active call, press Main Menu > Features.
2. Use the Down Arrow key to go to the Transfer to VM screen.
3. Press Select or OK to activate the transfer to voice mail.
Parking and unparking a call
About this task
Use this procedure to park the active call and answer the call from another extension.
This feature is only available in the Avaya Aura
®
environment.
Your system administrator must activate the feature for your extension.
In the IP Office environment, this feature is supported using short code dialing. Contact your system
administrator for the list of short codes.
Procedure
1. While on an active call, press Main Menu > Features.
2. Use the Down Arrow key to go to the Call Park screen.
3. Press Select or OK.
The phone parks the call.
4. To answer a parked call, press Main Menu > Features.
5. Use the Down Arrow key to go to the Call Unpark screen.
6. Press Select or OK.
7. Enter the extension from which the call was parked.
8. Press OK.
The phone unparks the call.
Activating Do Not Disturb
About this task
Use this procedure to direct incoming calls to a predefined coverage number that is set by the
system administrator.
In the IP Office environment, this feature is supported using short code dialing. Contact your system
administrator for the list of short codes.
Parking and unparking a call
March 2017 Using Avaya J129 IP Phone 37
Comments on this document? infodev@avaya.com
To Next Page
Loading...
