Activating and deactivating call forward
About this task
Use this procedure to forward incoming calls to a specified number.
In the IP Office environment, this feature is supported using short code dialing. Contact your system
administrator for the list of short codes.
Before you begin
Ensure that the system administrator enables Call Forward features for your extension.
Procedure
1. Press Main Menu > Features.
2. Use the Down Arrow key to go to one of the following Call Forward screens.
• Call Fwd
• Call Forward-Busy
• Call Forward-No Answer
3. Press Select or OK.
4. In the Destination field, enter the number where you want to forward the incoming calls.
5. Press Save or OK.
The phone generates a confirmation tone and returns to the Features menu.
6. To deactivate any of the Call Forward feature, go to the respective screen and press Select
or OK.
Activating EC500
About this task
Use this procedure to answer calls on your cell phone.
This feature is only available in the Avaya Aura
®
environment.
Before you begin
The system administrator must program the phone so that you can receive incoming calls on your
cell phone.
Procedure
1. Press Main Menu > Features.
2. Use the Down Arrow key to go the EC500 screen.
3. Press OK.
Activating EC500
March 2017 Using Avaya J129 IP Phone 39
Comments on this document? infodev@avaya.com
To Next Page
Loading...
