Chapter 10: Managing your presence
Enabling Away timer
About this task
Although Avaya J129 IP Phone does not display presence, it can report it so that the other devices
can display your presence. Use this procedure to automatically update the presence status to Away
after a predefined time.
Note:
This feature is only available in the Avaya Aura
®
environment.
Procedure
1. Press Main Menu > Settings > Presence Settings.
The phone displays the Away Timer screen.
2. Press Change to turn on the timer.
3. Use the Down Arrow key to go to the Timer Value screen.
4. Enter time in minutes.
You can enter any value from 1 to 999.
5. Press Save.
March 2017 Using Avaya J129 IP Phone 41
Comments on this document? infodev@avaya.com
To Next Page
Loading...
