5. Press Select to assign the contact to the selected Speed Dial number.
You can assign only one contact to a Speed dial number.
Replacing and clearing a Speed Dial contact
About this task
Use this procedure to replace or remove a Speed Dial contact.
This feature is only available in the Avaya Aura
®
environment.
Before you begin
Assign a contact to a Speed Dial number.
Procedure
1. Press Main Menu > Settings > Phone Settings.
2. Select Speed Dial.
3. Use the Down Arrow key to go to the Speed Dial contact that you want to replace or clear.
4. Press one of the following:
• Replace: To replace the contact with another contact.
• Clear: To remove the contact from the Speed Dial.
5. Press Replace or Clear when the phone prompts for confirmation.
Setting Visual alerting
About this task
Use this procedure to illuminate the beacon LED when there are incoming calls and messages.
Procedure
1. Press Main Menu > Settings > Phone Settings.
2. Use the Down Arrow key to go to the Visual alerting screen.
3. Press Change to activate or deactivate visual alerting.
4. Press Save.
Customizing Avaya J129 IP Phone
March 2017 Using Avaya J129 IP Phone 44
Comments on this document? infodev@avaya.com
To Next Page
Loading...
