Avaya J129 - Call History

Procedure
1. During an active call, press Hold.
2. Do one of the following:
• To make a new call, press New Call and dial the extension of the second person.
• To answer an incoming call, press Answer.
• To toggle between the calls, press Swap.
3. When the second person answers the call, press the Conf softkey.
The person on hold is added to the conference call.
Putting a conference call on hold and resuming a call
About this task
Use this procedure to put a conference participant on hold, while other participants continue the
conference call.
Procedure
1. Press Hold soft key during a conference call.
2. Do one of the following:
• Press Resume.
• Select the call appearance to resume the conference call.
Call history
Call log
Depending on the call type, call log provides the following information about the last 100 calls on
your phone:
• Caller name
• Caller number
• Call time-stamp
• Call duration
Avaya J100 Series IP Phones software version 4.0.3 and later always encrypts the content of the
call log file.
If you downgrade the software of your phone to a version earlier than 4.0.3, you will lose the call
log details.
Call related features
October 2019 Using Avaya J129 IP Phone in an Open SIP environment 27
Comments on this document? infodev@avaya.com