Avaya J129 - Adjusting the Call Volume

Procedure
1. Press Main Menu.
2.
Scroll to Features, and press one of the following:
• Select
• OK
• The corresponding line key
3. Scroll to Call Forward Busy feature, and press one of the following:
• Enable
• OK
4. In the Destination field, enter the call forwarding number.
5. Press Enter.
Forwarding unanswered calls
About this task
Forward incoming calls that are not answered at the primary number to a specific call forwarding
number.
Before you begin
Ensure that the administrator enabled the call forwarding feature.
Procedure
1. Press
Main Menu.
2.
Scroll to
Features, and press one of the following:
• Select
• OK
• The corresponding line key
3. Scroll to the Call forward - NA feature, and press one of the following:
• Config
• OK
4. Configure the following fields:
• Destination: Enter the call forwarding number.
• Number of rings: Enter the number of rings after which the call is forwarded.
5. Press Save.
6. Press Enable.
Advanced features
October 2019 Using Avaya J129 IP Phone in an Open SIP environment 35
Comments on this document? infodev@avaya.com