Procedure
1. Do one of the following:
• Lift the handset.
• Press Speaker.
2. On the Phone screen, scroll to the required multicast page group, and press Select.
The phone displays the Paging <group name> box.
3. To end the multicast page, do one of the following:
• Press End Call.
• If you use the handset as an audio device, hang up.
Simultaneous Ring Personal
With the Simultaneous Ring Personal (SRP) feature, you can list up to 10 phone numbers or SIP-
URI addresses you want to receive calls to in addition to your primary phone. This feature may be
used when, for example, you are not at your desk phone and you need to answer a call from your
cell phone. Simultaneous ring can be turned off when you are at your desk on a call.
Important:
If your cell phone has the voice mail which is activated before your office voice messaging, the
voice messages will be recorded in your cell phone database.
Note:
If Simultaneous Ring Personal is activated, the corresponding LED on the phone is green. If
the feature is disabled, the LED is red. Contact your system administrator or go to the
BroadSoft web interface yourself to activate the feature. See https://www.broadsoft.com/ for
more information.
Accessing Simultaneous Ring Personal from the phone menu
About this task
Use this task to access Simultaneous Ring Personal page from the phone menu for configuring
the settings, viewing and editing the list of simultaneous ring numbers.
Procedure
1. On the phone, go to Main menu > Features.
2. Scroll to Simultaneous ringing, and press Config.
Disabling Simultaneous Ring Personal during an active call
About this task
Use this procedure to turn off Simultaneous Ring Personal when you are on an active call.
Advanced features
October 2019 Using Avaya J129 IP Phone in an Open SIP environment 38
Comments on this document? infodev@avaya.com
To Next Page
Loading...
