Avaya J129 - Page 39

Procedure
1. On the phone, go to Main menu > Features > Simultaneous ringing.
2. On the Simultaneous ringing page, scroll to Do not ring with active call.
3. Press Toggle to disable or enable the setting.
The changes will be saved automatically.
Adding a Simultaneous Ring number
About this task
Use this procedure to add a number or a SIP-URI address for a simultaneous ring.
Important:
You can add maximum 10 numbers or SIP-URI addresses.
Procedure
1. On the phone, go to Main menu > Features > Simultaneous ringing.
2. On the Simultaneous ringing page, scroll to Numbers, and press Select.
3. Press Add.
4. In the Add number window, scroll to the Phone number or SIP-URI field, and enter the
number digits or a SIP-URI address:
• Press Abc or 123 to enter letters or numbers.
• Press Backspac to delete the symbols entered.
5. (Optional) Scroll to the Answer conformation required, and press Toggle to toggle the
setting to on or off.
6. Press Save.
Editing Simultaneous Ring numbers
About this task
Use this procedure to edit a number or a SIP-URI address for a simultaneous ring.
Procedure
1. On the phone, go to Main menu > Features > Simultaneous ringing.
2. On the Simultaneous Ringing page, scroll to Numbers, and press Select.
3. Scroll to the number or a SIP-URI address you want to edit, and press Edit.
4. In the Edit Number window, scroll to the Phone number or SIP-URI field, and enter the
number digits or a SIP-URI address:
• Press Abc or 123 to enter letters or numbers.
• Press Backspac to delete the symbols entered.
Advanced features
October 2019 Using Avaya J129 IP Phone in an Open SIP environment 39
Comments on this document? infodev@avaya.com