Avaya J129 - Chapter 4: Redialling; Redialling in List Mode

Chapter 7: Avaya J129 IP Phone
customization
Phone
Setting the Dial mode
About this task
Use this procedure to set the dialing method used to initiate dialing.
Procedure
1. Press Main menu > Settings > Phone settings.
2. Use the Down Arrow key to go to the Dial mode screen.
3. Press Toggle to select one of the following :
• Manual: Press the Call softkey to start a call.
• Auto: The dialed digits must match the dialplan to start a call.
4. Press Save.
Displaying сall timers
About this task
Use this procedure to display the duration of calls.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone settings, and press Select.
4. Use the Down Arrow key to go to the Display call timers.
5. Press Toggle to activate or deactivate the call timers.
October 2019 Using Avaya J129 IP Phone in an Open SIP environment 43
Comments on this document? infodev@avaya.com