Before you begin
Ensure that the system administrator activates the option for your extension.
Procedure
1. Press Main menu > Settings > Phone settings.
2. Use the Down Arrow key to go to the Mute Alert screen.
3. Press Toggle to select one of the following:
• Audible: If you put a call on mute and start speaking after eight seconds, the phone
produces a beep to notify that you are on mute.
• Visual: If you put a call on mute and start speaking after eight seconds, the phone
displays the Call Muted icon.
Note:
If the user stops talking while mute alerting is on, after a delay of 500 milliseconds,
the call muted icon is replaced by the normal active call icon
• Both: Combines the actions of both audible and visual alerting.
• None: Disables the mute alert for your phone.
4. Press Save.
Mute alert turns off automatically when you take the call off mute.
Setting Visual alerting
About this task
Use this procedure to illuminate the beacon LED when there are incoming calls and messages.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone settings, and press Select.
4. Scroll to Alerting on calls, and press Select.
5. Scroll to Beacon LED.
6. Press Toggle to enable or disable visual alerting.
7. Press Save.
Related links
Visual alerting on page 46
Phone
October 2019 Using Avaya J129 IP Phone in an Open SIP environment 45
Comments on this document? infodev@avaya.com
To Next Page
Loading...
