Turning error tones on and off
About this task
Use this procedure to activate the error tone alarm when you perform an incorrect action while
using the phone.
Procedure
1. Press Main menu > Settings > Audio Settings.
2. Use the Down Arrow key to go to the Error Tones screen.
3. Press Toggle to turn error tones on or off.
4. Press Save.
Turning audio settings on and off
About this task
Automatic gain control (AGC) raises the volume when a caller is speaking in a low voice and
lowers the volume when the caller is speaking aloud. Use this procedure to turn AGC on or off
separately for the headset and speaker.
Procedure
1. Press Main menu > Settings > Audio Settings.
2. Select AGC.
3. Use the Up and Down Arrow keys to select the handset or speaker for which you want to
turn AGC on or off.
4. Press Toggle to turn AGC on or off.
5. Press Save.
Setting Handset Profile
About this task
The task is relevant for people with hearing difficulties. Use this procedure to change the audio
characteristic of the phone.
Procedure
1. Press Main menu > Settings > Audio Settings.
2. Select Handset Profile.
Audio
October 2019 Using Avaya J129 IP Phone in an Open SIP environment 47
Comments on this document? infodev@avaya.com
To Next Page
Loading...
