Avaya J129 - Setting the Time Zone; Setting the Network Mode

Setting the time zone
About this task
Use this procedure to set the current time of the phone.
Procedure
1. Press Main menu > Settings > Display Settings.
2. Scroll to Time zone, and press Select.
3. To set the required time, do one of the following:
• Use the Left Arrow and Right Arrow key.
• Press - or + soft key.
4. Press Save.
Setting the network mode
About this task
You can set the network mode to Ethernet or Wi-Fi. You do not need to perform this procedure if
your phone is configured to connect to Ethernet or a specific Wi-Fi network.
Before you begin
Ensure that the system administrator gave you access to perform this task.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Network, and press Select.
4. Scroll to Network mode.
The Network mode setting shows the following options:
• Ethernet: To connect to an Ethernet network.
• Wi-Fi: To connect phone to a Wi-Fi network.
5. Press one of the following:
• Toggle
• Right arrow key
• Left arrow key
Avaya J129 IP Phone customization
October 2019 Using Avaya J129 IP Phone in an Open SIP environment 50
Comments on this document? infodev@avaya.com