Transferring a call on hold
About this task
Use this procedure to transfer a call on hold to an outgoing or an incoming call.
Before you begin
Press Hold to put an ongoing call on hold.
Procedure
1. Press one of the following softkeys:
• New Call: To make a new call.
• Answer: To answer a call
2. When the called party answers the call or you answer the call, press the Transfer softkey.
3. Press the Transfer softkey again when the phone prompts for confirmation.
Transferring a call on hold
January 2020 Using Avaya J129 IP Phone SIP 25
Comments on this document? infodev@avaya.com
To Next Page
Loading...
