Avaya J129 - Putting a Conference Call on Hold and Resuming a Call; Managing Contacts; Adding a New Contact

Procedure
1. During an active call, press Hold.
2. Do one of the following:
• To make a new call, press New Call and dial the extension of the second person.
• To answer an incoming call, press Answer.
• To toggle between the calls, press Swap.
3. When the second person answers the call, press the Conf softkey.
The person on hold is added to the conference call.
Putting a conference call on hold and resuming a call
About this task
Use this procedure to put a conference participant on hold, while other participants continue the
conference call.
Procedure
1. Press Hold soft key during a conference call.
2. Do one of the following:
• Press Resume.
• Select the call appearance to resume the conference call.
Managing contacts
Adding a new contact
About this task
Use this procedure to add a contact to the phone. You can save up to 250 contacts.
Procedure
1. To open Contacts list, do one of the following:
• Press Contacts.
• Press Main menu, and select Contacts.
2. Do one of the following:
• If your Contacts list is empty, press New.
Managing contacts
January 2020 Using Avaya J129 IP Phone SIP 33
Comments on this document? infodev@avaya.com