Avaya J129 - Blocking Your Extension from Displaying During Calls; Call Forwarding; Forwarding a Call to Another Extension

Blocking your extension from displaying during calls
About this task
This feature is only available in an Avaya Aura
®
environment.
Before you begin
Ensure that the system administrator activates the option for your extension.
Procedure
1. Press Main menu > Features.
2. Select CPN block.
3. In the Destination field, enter the extension number that you do not want the called party
to see.
4. Press OK.
Call Forwarding
The phone supports the following Call Forward types:
• Call Forward: Diverts all incoming calls to another number.
• Call Forward Busy: Diverts incoming calls to another number if you are on a call.
• Call Forward No Answer: Diverts incoming calls to another number when you do not answer
the call within the set time.
Enhanced Call Forward
The Enhanced Call Forward feature is used to set rules on call forwarding. You can set the rules
by entering the internal and external phone numbers in the corresponding Call Forward types.
Forwarding a call to another extension
About this task
Use this procedure to forward incoming calls to a specified number.
In the IP Office environment, this feature is supported using short code dialing. Contact your
system administrator for the list of short codes.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Procedure
1. Press Main menu.
Blocking your extension from displaying during calls
January 2020 Using Avaya J129 IP Phone SIP 41
Comments on this document? infodev@avaya.com