6. Press Save.
Assigning Speed Dial
About this task
Use this procedure to assign speed dial numbers to your contacts. You can assign up to nine
speed dial entries.
Procedure
1. Press Main menu > Settings > Phone settings.
2. Select Speed Dial.
3. Use the Up and Down Arrow keys to select a Speed Dial number.
4. Press Contacts to select a contact.
5. Press Select to assign the contact to the selected Speed Dial number.
You can assign only one contact to a Speed dial number.
Replacing and clearing a Speed Dial contact
About this task
Use this procedure to replace or remove a Speed Dial contact.
Before you begin
Assign a contact to a Speed Dial number.
Procedure
1. Press Main menu > Settings > Phone settings.
2. Select Speed Dial.
3. Use the Down Arrow key to go to the Speed Dial contact that you want to replace or clear.
4. Press one of the following:
• Replace: To replace the contact with another contact.
• Clear: To remove the contact from the Speed Dial.
5. Press Replace or Clear when the phone prompts for confirmation.
Activating Mute Alert
About this task
Use this procedure to configure your phone to alert if you speak while your phone is on mute.
Phone
January 2020 Using Avaya J129 IP Phone SIP 49
Comments on this document? infodev@avaya.com
To Next Page
Loading...
