Avaya J129 - Backup and Restore; Backup and Restore Overview

4. To access the list of available Wi-Fi networks, scroll to Wi-Fi network, and press Select.
5. Scroll to the required Wi-Fi network, and press Connect to start the connection process.
6. Press OK to restart the phone.
7. If the security is WEP or WPA/WPA2 PSK, in Password, enter the password for the Wi-Fi
network.
8. If the security is 802.1x EAP, enter the following:
• Identity: Either your personal user ID or the shared user ID provided by your system
administrator.
• Anonymous Identity: Leave blank or use the shared Anonymous Identity provided by
your system administrator.
• Password: Either your personal password or the shared password provided by your
system administrator.
Result
If the credentials are authenticated successfully, the phone automatically restarts to complete the
connection.
Related links
Setting the network mode on page 55
Backup and restore
Backup and restore overview
The phone supports the backup and restoration of the following user-specific data:
• User contacts
• Local ring type
• Local Do Not Disturb status
• Local call forward settings
• Auto-answer mode configuration
• Speed dial settings
• Language
• Time zone and time format
• Date format
Backup process is initiated only after retrieval of user-specific data is successful.
Avaya J129 IP Phone customization
January 2020 Using Avaya J129 IP Phone SIP 58
Comments on this document? infodev@avaya.com