Unlocking your phone
About this task
Unlock the phone using a PIN or a password. Depending on the configuration, the phone screen
displays the field for entering a PIN or a password. A PIN is a digit-only value, while a password
can be an alphanumeric value.
You cannot unlock the phone if you enter an incorrect PIN or password. The system administrator
sets the maximum number of incorrect attempts. If you exceed the limit, the phone temporarily
blocks you from attempting to unlock the phone for a period that the administrator specifies.
Before you begin
If you do not know or remember your PIN or password, contact your system administrator.
Procedure
1. Press Unlock.
2. On the Phone screen, enter a PIN or a password.
Setting the network mode
About this task
You can set the network mode to Ethernet or Wi-Fi. You do not need to perform this procedure if
your phone is configured to connect to Ethernet or a specific Wi-Fi network.
Before you begin
Ensure that the system administrator gave you access to perform this task.
Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Network and press Select.
4. Scroll to Network mode.
The Network mode setting shows the following options:
• Ethernet: To connect to an Ethernet network.
• Wi-Fi: To connect phone to a Wi-Fi network.
5. Press one of the following:
• Toggle
• Right Arrow key
• Left Arrow key
Unlocking your phone
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
19
Comments on this document? infodev@avaya.com
To Next Page
Loading...
