5. Scroll to the required Wi-Fi network and press Connect to start the connection process.
6. To restart the phone, press OK.
7. If the security is WEP or WPA/WPA2 PSK, in Password, enter the password for the Wi-Fi
network.
8. If the security is 802.1x EAP, enter the following:
• Identity: Either your personal user ID or the shared user ID provided by your system
administrator.
• Anonymous Identity: Leave blank or use the shared Anonymous Identity provided by
your system administrator.
• Password: Either your personal password or the shared password provided by your
system administrator.
Result
If the credentials are authenticated successfully, the phone automatically restarts to complete the
connection.
Related links
Setting the network mode on page 19
Getting started
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
22
Comments on this document? infodev@avaya.com
To Next Page
Loading...
