Transferring a call on hold
About this task
Use this procedure to transfer a call on hold to an outgoing or an incoming call.
Before you begin
Press Hold to put an ongoing call on hold.
Procedure
1. Press one of the following soft keys:
• NewCall: To make a new call.
• Resume: To resume the call
2. When the called party answers the call or you answer the call, press the Transfer soft key.
3. Press the Transfer soft key again when the phone prompts for confirmation.
Incoming calls
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
28
Comments on this document? infodev@avaya.com
To Next Page
Loading...
