Chapter 9: Conference calls
Adding a person to an active call
About this task
You can add participants to an active call to set up a conference call.
Before you begin
Start a call.
Procedure
1. During a call, on the Phone screen, press More > Conf.
The phone puts the existing call on hold.
2. To make a call to a participant, do one of the following:
• Dial the phone extension by using the dial pad.
• Call the person from the Contacts list or the Recents list.
3. When the third participant answers the call, press the Join soft key.
4. To add another person, press Add and repeat Steps 2 and 3.
Adding a person on hold to a conference call
About this task
Use this task to add a person that you have put on hold to a conference call.
Procedure
1. During an active call, press Hold.
2. Do one of the following:
• To make a new call, press NewCall and dial the extension of the second person.
• To answer an incoming call, press Answer.
• To toggle between the calls, press Swap.
3. When the second person answers the call, press the Conf > Merge softkey.
The person on hold is added to the conference call.
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
40
Comments on this document? infodev@avaya.com
To Next Page
Loading...
