Procedure
1. During an active call, on the phone screen, press Main menu > Features.
2. Press No Hold Conference.
Select a destination dialogue box is displayed.
3. You can add users to a no hold conference by using one of the following methods:
• If an extension number is pre-configured by your administrator, you can press Select.
• If the extension number is not pre-configured, press the Dial soft key to use the dialpad
and manually enter the extension number, press OK.
• Press Contacts, Recents or Phone button to select the number from the list.
• Press the Browser soft key to select the destination number from the browser
application.
• Press the Autodial, Busy indicator or Team line key to select the number as
destination target.
The no hold conference feature is activated.
4. To add more participants to the existing no hold conference, repeat Steps 2 and 3.
Note:
You can press the Cancel soft key to terminate the no hold conference.
5. Press Enter or OK to activate the feature in case of manual dialling.
Related links
No Hold Conference on page 41
Handling calls and conferences using Multiple Device Access on page 50
Conference calls
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
42
Comments on this document? infodev@avaya.com
To Next Page
Loading...
