Chapter 11: Do not disturb and Call
Forward
Do not disturb
You can use the Do not disturb feature to avoid audio notifications for all direct incoming calls.
The phone redirects these incoming calls to a predefined coverage number that your system
administrator sets. The feature is also referred to as Send all calls. If required, contact your
administrator to name this feature on your phone as Send all calls.
Related links
Activating and deactivating Do not disturb on page 45
Activating and deactivating Do not disturb
About this task
You can activate the Do not disturb feature to prevent the phone from ringing when you get a call.
The phone redirects the direct incoming calls to a predefined coverage number that your system
administrator sets.
In the IP Office environment, this feature is supported using short code dialing. Contact your
system administrator for the list of short codes.
Before you begin
Your system administrator must activate the feature for your extension.
Procedure
1. Press Main menu > Features.
2. Use the Down Arrow key to go to the Do not disturb screen.
3. Select Do not disturb to activate or deactivate the feature.
Related links
Do not disturb on page 45
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
45
Comments on this document? infodev@avaya.com