4. Press Select.
You can see the Select a destination dialogue box.
5. Do one of the following to enter the number where you want to forward the incoming calls:
• Press the Dial soft key to use the dialpad and manually enter the number.
• Press Contacts, Recents or Phone button to select the number from the list.
• Press the Browser soft key to select the destination number from the browser
application.
• Press the Autodial, Busy indicator or Team line key to select the number as
destination target.
Call Forward feature is activated.
6. Press Enter to activate the call forward feature in case you manually dial the extension
number.
The phone generates a confirmation tone and returns to the Features screen.
7. (Optional) To cancel the feature, press the Cancel soft key.
8. To disable any Call Forward option, go to the active Call Forward option and press Select.
Activating EC500
About this task
Use this procedure to answer calls on your cell phone.
This feature is only available in the Avaya Aura
®
environment.
Before you begin
The system administrator must program the phone so that you can receive incoming calls on your
cell phone.
Procedure
1. Press Main menu > Features.
2. Use the Down Arrow key to go the EC500 screen.
3. Press OK.
Activating EC500
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
47
Comments on this document? infodev@avaya.com
To Next Page
Loading...
