Sending a multicast page
About this task
You can send a multicast page to a group of users by activating the Multicast Paging group on the
Phone screen. If the required group is not added on this screen, you can access all multicast page
groups configured for your phone in the Features menu.
Procedure
1. Do one of the following:
• Lift the handset.
• Press Speaker.
2. On the Phone screen, scroll to the required multicast page group, and press Select.
The phone displays the Paging <group name> box.
3. To end the multicast page, do one of the following:
• Press End Call.
• If you use the handset as an audio device, hang up.
Parking and unparking a call
About this task
Use this procedure to park the active call and answer the call from another extension.
This feature is only available in the Avaya Aura
®
environment.
Your system administrator must activate the feature for your extension.
In the IP Office environment, this feature is supported using short code dialing. Contact your
system administrator for the list of short codes.
Procedure
1. While on an active call, press Main menu > Features.
2. Use the Down Arrow key to go to the Call Park screen.
3. Press Select or OK.
The phone parks the call.
4. To answer a parked call, press Main menu > Features.
5. Use the Down Arrow key to go to the Call Unpark screen.
6. Press Select or OK.
7. Enter the extension from which the call was parked.
Parking and unparking a call
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
51
Comments on this document? infodev@avaya.com
To Next Page
Loading...
