Notifications
You see the following messages on your e-Phone screen after the phone is configured or
disconnected from
Avaya Workplace Client:
• Shared Control active
• Shared Control inactive
For information on installing and configuring Avaya Workplace Client, see Planning for and
Administering Avaya Workplace Client for Android, iOS, Mac, and Windows and Using Avaya
Workplace Client for Android, iOS, Mac, and Windows at https://support.avaya.com/.
Tracing a malicious call
About this task
Use this procedure to activate Malicious Call Tracing and providing information about the
malicious call. This feature is available only if your administrator has set up the phone system
to trace and track malicious calls and there is an attendant or controlling user to oversee the trace.
This feature is only available in an
Avaya Aura
®
environment.
Before you begin
Your system administrator must activate the feature for your extension.
Procedure
1. During an active call, press Main menu > Features.
2. Use the Down Arrow key to go to the MCT Act screen.
3. Press OK.
An alerting tone or flashing beacon LED indicates that the trace is active. Hanging up
deactivates
MCT Act.
Voicemail
You can use the Voicemail feature on your phone with a voice messaging service such as
Avaya Messaging. Your system administrator enables the Voicemail feature and configures your
voicemail number and password. The beacon LED on your phone lights when you receive a
voicemail. Listen to and follow the audio prompts to perform the required action on the voicemail.
If your voice messaging service provides the web interface feature, you can access voicemail on
your computer. Contact your system administrator for voicemail web interface feature details.
Advanced features
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
54
Comments on this document? infodev@avaya.com
To Next Page
Loading...
