Avaya J129 - Chapter 13: Phone customization; Phone; Setting the Dial mode; Displaying сall timers

Chapter 13: Phone customization
Phone
Setting the Dial mode
About this task
Use this procedure to set the dialing method used to initiate dialing.
Procedure
1. Press Main menu > Settings > Phone settings.
2. Use the Down Arrow key to go to the Dial mode screen.
3. Press Toggle to select one of the following :
• Manual: Press the Call softkey to start a call.
• Auto: The dialed digits must match the dialplan to start a call.
• Default: Press the Call soft key to start a call.
4. Press Save.
Displaying сall timers
About this task
Use this procedure to display the duration of calls.
Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Phone settings, and press Select.
4. Use the Down Arrow key to go to the Display call timers.
5. Press Toggle to activate or deactivate the call timers.
6. Press Save.
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
56
Comments on this document? infodev@avaya.com