2. Use the Down Arrow key to go to the Mute alert screen.
3. Press Toggle to select one of the following:
• Audible: If you put a call on mute and start speaking after eight seconds, the phone
produces a beep to notify that you are on mute.
• Visual: If you put a call on mute and start speaking after eight seconds, the phone
displays the Call Muted icon.
Note:
If the user stops talking while mute alerting is on, after a delay of 500 milliseconds,
the call muted icon is replaced by the normal active call icon
• Both: Combines the actions of both audible and visual alerting.
• None: Disables the mute alert for your phone.
4. Press Save.
Mute alert turns off automatically when you take the call off mute.
Visual alerting
The beacon LED works in the following manner to indicate incoming calls and messages:
• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon
LED turns off every 15 seconds.
• If the call is on hold, the beacon LED stops flashing.
When the call is on speaker, the speaker icon ( ) replaces the active call handset ( ) icon.
Related links
Setting Visual alerting on page 58
Setting Visual alerting
About this task
The phone illuminates the beacon LED when there are incoming calls and messages. Use this
procedure to enable the visual alerting.
Procedure
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Phone settings, and press Select.
4. Scroll to Alerting on calls, and press Select.
Phone customization
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
58
Comments on this document? infodev@avaya.com
To Next Page
Loading...
