Avaya J129 - Audio; Setting a ring tone for incoming calls; Turning button clicks on and off; Turning error tones on and off

5. Scroll to Beacon LED.
6. Press Toggle to enable or disable visual alerting.
7. Press Save.
Related links
Visual alerting on page 58
Audio
Setting a ring tone for incoming calls
Procedure
1. Press Main menu > Settings > Audio settings.
2. Select Personalize ringing
3. Use the Down Arrow key to select Ring Type.
4. Press Select to choose the required ring tone.
5. Press Save.
Turning button clicks on and off
Procedure
1. Press Main menu > Settings > Audio settings.
2. Use the Down Arrow key to go to the Button clicks screen.
3. Press Toggle to turn the audio on or off.
4. Press Save.
Turning error tones on and off
About this task
Use this procedure to activate the error tone alarm when you perform an incorrect action while
using the phone.
Procedure
1. Press Main menu > Settings > Audio settings.
2. Use the Down Arrow key to go to the Error tones screen.
3. To turn error tones on or off, press Toggle.
4. Press Save.
Audio
October 2022 Using Avaya J129 SIP IP Phone in Avaya Aura
®
59
Comments on this document? infodev@avaya.com