Answering a call when on another call
About this task
Use this procedure to answer an incoming call during another call by using the expansion module
line buttons.
Procedure
On Avaya J100 Expansion Module, press the flashing line button to activate the default audio
device and answer the call.
The phone puts the first call on hold and moves to the second call.
Accessing features
About this task
If your system administrator has activated features such as Call Forwarding, Call Pickup, Auto
Callback, you can enable and disable them on the Avaya J100 Expansion Module using feature
labels. Some feature labels might be preset by the system administrator.
Procedure
On the Avaya J100 Expansion Module, press the labelled line button next to the feature you want
to enable or disable.
The LED flashes green or red depending on whether the feature is enabled or disabled.
Applications
Applications overview
On Avaya J100 Expansion Module, you can quickly access applications like Contacts, Recents
and Calendar by pressing the corresponding labelled button.
The following table shows some examples of applications available on the expansion module,
their icons and description:
Note:
The application icons on the expansion module are available only with the SIP firmware.
Call operations
January 2024 Using Avaya J100 Expansion Module for SIP 14
Comments on this document? infodev@avaya.com
To Next Page
Loading...
