Chapter 4: Settings
Customizing the display
You can set the display mode, a customized screen saver and background image for Avaya J100
Expansion Module (JEM24). Your administrator provides access to set these images.
You can set the background and screen saver image of the JEM24 using the:
• Pre-defined images
• Customized images
• Images that are the same as the primary display images
If you and your administrator do not set the screen saver and background image for the JEM24,
the phone uses the Avaya Device Image by default.
If your administrator makes the required settings, you can set the same background and screen
saver image for the primary display and the JEM24 module. The JEM24 display reflects any
changes made to the primary display. If you select a custom image for the primary display, the
JEM24 displays the default Avaya device image.
Use the phone Settings menu to configure the following Avaya J100 Expansion Module features:
• Background image
• Screen saver
• Font size
• Brightness
• Display mode
Note:
Avaya J100 Expansion Module does not support adjusting the display contrast.
Avaya J100 Expansion Module displays fewer characters in a line than the JBM24 Button
Module. If required, decrease the font size in the Settings menu on the phone.
Display Mode
With the Display Mode feature, you can personalize the phone display according to your choice
of display and font color. You can change the display mode of your phone to Dark or Light. The
font color is black if you set the display mode to Light. The font color is white if you set the display
mode to Dark.
January 2024 Using Avaya J100 Expansion Module for SIP 16
Comments on this document? infodev@avaya.com
To Next Page
Loading...
