Avaya J129 - Short Codes

Short Codes
Short codes are numbers that you can dial to enable and disable various features. The following
are default short codes that may be available. However, your system administrator can remove
and change the short codes available to you or all users. To use a short code, you may have to
put your currently call on hold.
These are useful as they can be dialed from any phone on the system. For example, this allows
you to login at a basic analog extension and still control a number of features.
Some short codes require you to enter some information when you dial them, typically an
extension number. That is indicated by N in the short codes shown below.
Login
• Log In: *35*N*P# – Log in to a phone using your extension number (N) and login code (P).
• Log Out: *36 – Log yourself out from the phone where you are currently logged in.
Related links
Logging In/Out on page 119
Short Codes
April 2020 J100 Series Phone User Guide 125
Comments on this document? infodev@avaya.com