Avaya J139 - Logging in to Your Phone; Logging out of Your Phone

• Never: To never prompt for the provisioning server address.
• Cancel: To cancel the prompt and display the Login screen.
3. After you press Config, enter the provisioning server address in the Address field.
The address is an alphanumeric URL. For example, http://myfileserver.com/
j100/.
Tip:
To enter the dot symbol (.) in the field, press the alphanumeric soft key to toggle to the
ABC mode.
To enter the forward-slash symbol (/) in the field, press the / soft key.
4. (Optional) Enter the Group number.
Obtain the Group number from your system administrator. The value ranges from 0 to 999.
If you do not enter a value, the phone uses the default value of 0.
5. Press Save.
The phone continues the boot process and connects to the provisioning server.
Logging in to your phone
Before you begin
Your extension and password are provided by your administrator.
Procedure
1. On the Login screen in the Username field, type your extension.
2. Press Enter.
3. In the Password field, type your password.
4. Press Enter.
5. To change the extension number or the password, press Backspac.
Logging out of your phone
About this task
Use this procedure to log out of your extension.
Procedure
1. Press Main Menu.
Getting started
February 2022 Quick Reference for Avaya J139 SIP IP Phone in Open SIP 6
Comments on this document? infodev@avaya.com