Turning button clicks on and off
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
4. Use the Down Arrow key to go to the Button clicks screen.
5. Press Toggle to turn the audio on or off.
6. Press Save.
Turning error tones on and off
About this task
Use this procedure to activate the error tone alarm when you perform an incorrect action while
using the phone.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
4. Use the Down Arrow key to go to the Error tones screen.
5. Press Toggle to turn error tones on or off.
6. Press Save.
Enabling wireless headset bidirectional signaling
Before you begin
Check if the headset supports electronic hook switch (EHS) signaling.
Note:
Headset Signaling setting is used to configure only DECT headsets.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
Audio
April 2020 Using Avaya J159 IP Phone in an Open SIP environment 121
Comments on this document? infodev@avaya.com
To Next Page
Loading...
