Avaya J159 - Page 15

No. Name Description
2 Phone display Displays two areas:
1. Top Bar: It is always visible, and displays communication
status, time and date, and device status.
2. Application area displays the following:
• Application header: It displays the context specific
application title, and one or more subtitles. Depending on
the appearance type and the call state, the header
displays details of the call.
• Application content area: It displays menus, lists, pop-up
windows, images, and other application content.
• Softkey labels area: It displays labels with information
about the state of the soft key button.
3 Line keys Used to select the corresponding line or feature. Each line key
has a combination of red and green LEDs that provide call or
feature specific visual alert.
Note:
The default action depends on the application and the
context.
4 Soft keys Used to select the corresponding label of context-specific
actions.
With the Help soft key, you can view a short description of the
features available on your phone.
6 Voicemail Used to dial the configured voice mail number to receive a voice
message.
7 Redial Used to redial the most recently dialed number from any screen
of the phone.
8 Speaker Used to turn on the speaker.
9 Hold Used to put an active call on hold and resume a held call.
10 Line keys Used to select the corresponding line or feature. Each line key
has a combination of red and green LEDs that provide call or
feature specific visual alert.
Note:
The default action depends on the application and the
context.
11 Secondary display Provides quick access to line appearances, features, and phone
menus.
12 Left, Right keys Used to navigate on the Secondary Display screen.
13 Mute Used to mute and unmute the outgoing audio.
Table continues…
Physical layout of a J159 IP Phone
April 2020 Using Avaya J159 IP Phone in an Open SIP environment 15
Comments on this document? infodev@avaya.com