Avaya J159 - Chapter 6: Handling Outgoing Calls; Making a Call by Using the Dial Mode; Making a Call Without Using the Dial Mode; Redialing a Number

Chapter 6: Handling outgoing calls
Making a call by using the dial mode
About this task
Use this procedure to make a call without lifting the handset or pressing Speaker.
Set the dial mode on the phone to one of the following:
• Auto: Dial the number.
The phone starts the call when the inter digit timer times out.
• Auto: Dial the number and press # key.
Pressing # key indicates end of dial, the phone starts the call.
• Manual: Dial the number, and press the Call soft key.
Related links
Setting the dialing mode on page 110
Making a call without using the dial mode
Procedure
1. Do one of the following:
• Lift the handset.
• Press Speaker.
• Press Headset.
2. Dial the number.
Redialing a number
About this task
You can redial the most recently dialed number.
April 2020 Using Avaya J159 IP Phone in an Open SIP environment 31
Comments on this document? infodev@avaya.com