6. Select a contact, and press Remove.
The contact will be removed from your Contacts list.
Assigning a ringtone to a contact
About this task
Use this procedure to assign a ringtone to a contact. You can assign a ringtone only to a contact
that is saved in the Contacts list.
Procedure
1. Press Contacts.
2. (Optional) To navigate through Main menu, do the following:
a. Scroll to Applications, and press Select.
b. Scroll to Contacts, and press Select.
3. Select the contact, and press Details.
4. Scroll to the active ringtone, and press Edit.
The Phone screen displays the Select ringtone window.
5. Scroll down to the ringtone that you want to assign, and press Select.
6. (Optional) To play the ringtone, press Play.
7. Press Save.
LDAP Directory
With the LDAP Directory feature, you can search contacts in available Lightweight Directory
Access Protocol (LDAP) directories. An LDAP directory option appears at the top of the Contacts
application list.
You can also select an LDAP directory as your contact search source. This selection disables
other search sources. When LDAP directory is an active search source, if you select another
search source, this selection disables LDAP directory search.
You can enter multiple search keywords and view up to 49 attributes for each match, such as
personal names, addresses, job titles and telephone numbers.
You can add frequently used LDAP contacts to your local Contacts with the help of the +Contact
soft key.
You can combine any found LDAP contact with an existing local contact with the help of the
Combine soft key.
Contacts
April 2020 Using Avaya J159 IP Phone in an Open SIP environment 42
Comments on this document? infodev@avaya.com
To Next Page
Loading...
