Avaya J159 - Chapter 8: Do Not Disturb; DND On;Off (Features Menu)

• Specify phones on which you can attend calls.
Note:
To activate the feature, contact your system administrator or go to the BroadSoft web interface
yourself to activate the feature. See
https://www.broadsoft.com/ for more information.
Enabling and disabling BroadWorks Anywhere
Procedure
1.
Press Main menu.
2.
Scroll to
Features, and press Select.
3. Scroll to BroadWorks Anywhere, and press one of the following:
• Enable: To enable the feature.
The green LED light turns on if one location is configured, else the user is redirected to
the feature configuration to perform one of the following:
- Press Add: To add a location.
- Press Delete: To delete a location.
- Press Edit: To modify a location.
- Press Toggle: To enable or disable a location.
Note:
The BroadWorks Anywhere feature is enabled only if a location is enabled.
• Disable: To disable the feature.
The red LED light turns on, indicating that the feature is available, but inactive.
4. (Optional) To enable or disable BroadWorks Anywhere feature, press the corresponding
line key.
Configuring BroadWorks Anywhere locations
About this task
A location is a phone number that you can use with your primary business number. Use this
procedure to configure locations for the BroadWorks Anywhere feature.
Procedure
1.
Press the Main menu.
2. Scroll to Settings, and press Select.
3.
Scroll to Features, and press Select.
BroadWorks Anywhere
April 2020 Using Avaya J159 IP Phone in an Open SIP environment 57
Comments on this document? infodev@avaya.com