• The Message Waiting Indicator is cleared, but voice mail might still be available if the voice
mail server to which calls are being sent is not in failover.
• Transitions back to the normal server will restore all original functionality.
Recording audio parameters
About this task
Use this procedure to record audio parameters information in your phone.
Note:
The saved audio parameters information is used for audio debugging.
Procedure
1. Press the Main menu.
2. Scroll to Network information, and press Select.
3. Scroll to Audio parameters, and press Select.
4. Press the Record soft key.
5. To stop the recording, press the Stop soft key.
Viewing the Product ID
About this task
The product ID information is available on a label on the back panel of your phone. Alternatively,
you can view the Product ID on the phone screen.
Procedure
1. Press the Main menu.
2. Scroll to Network information, and press Select.
3. Scroll to System, and press Select.
4. Scroll to Product ID.
Maintenance
April 2021 Using Avaya J159 SIP IP Phone in Avaya Aura
®
134
Comments on this document? infodev@avaya.com
To Next Page
Loading...
