Making a call transfer with a shortcut key
About this task
If the caller needs the information that you cannot provide, you can transfer the ongoing call to
another user using an Autodial key or a contact as shortcuts.
Note:
The actual key used for a shortcut action depends on the current configuration.
Depending on the configuration set by the system administrator, the phone might make a blind
transfer or an attended transfer immediately after the Transfer soft key is pressed. Contact your
system administrator for more details.
Before you begin
Ensure the following:
• If the configured shortcut is a BLF key, the required user is idle.
• The administrator has set the shortcut action for the key as call transfer.
Procedure
1. While on an active call, depending on the configuration, do one of the following on the
Phone screen:
• Press the Autodial or Contact line key.
• Scroll to the required Autodial line or contact, and press Transfer.
The phone displays the Transfer now or talk with [BLF user extension]?
confirmation window.
2. Press one of the following:
• Now: To immediately transfer the call to the selected user.
The phone displays the Incoming Call screen with the extension the call was transferred
to until the user answers the call.
• Talk: To place the call on hold, and to talk with the user first.
3. (Optional) If the user does not answer the BLF shortcut transferred call, press one of the
following in the Incoming Call screen:
• Pickup: to answer the call on your phone.
• Ignore: to end the call.
Making a conference call with a shortcut key
About this task
If you need to include the other agent in your conversation with the caller, you can add an Autodial
user or a contact to an active call to set up a conference call.
Advanced features
April 2021 Using Avaya J159 SIP IP Phone in Avaya Aura
®
70
Comments on this document? infodev@avaya.com
To Next Page
Loading...
