Activating Do not disturb
About this task
Use this procedure to direct incoming calls to a predefined coverage number that is set by the
system administrator.
In the IP Office environment, this feature is supported using short code dialing. Contact your
system administrator for the list of short codes.
Before you begin
Your system administrator must activate the feature for your extension.
Procedure
1. Press Main menu > Features.
2. Use the Down Arrow key to go to the Do not disturb screen.
3. Select Do not disturb.
Redirecting calls when Do Not Disturb is active
About this task
When your Presence status is set to Do Not Disturb, use this procedure to redirect calls.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Applications, and press Select.
4. Scroll to Presence Integration, and press Select.
5. Scroll to DND invokes SAC.
6. Press Toggle, and set the value to Yes.
7. Press Save.
Applications
April 2020 Using Avaya J159 IP Phone SIP 101
Comments on this document? infodev@avaya.com
To Next Page
Loading...
