Avaya J159 - Pre-Configuration of Keys; Precedence Call

Before you begin
Ensure that the administrator has activated the no hold conference feature, and you are on an call.
Procedure
1. During an active call, on the phone screen, press Main menu > Features.
2. Press
3. You can add users to a no hold conference by using one of the following methods:
• If an extension number is pre-configured by your administrator, you can press Select.
• If the extension number is not pre-configured, you will get a Dial screen to enter the
extension number, press OK.
4. To add more participants to the existing no hold conference, repeat Steps 2 and 3.
Related links
Handling calls and conferences using Multiple Device Access on page 31
Multiple Device Access on page 80
Dropping or Disconnecting the last participant from a conference call on page 51
Pre-configuration of keys
With the Pre-configuration of keys feature enabled, the Phone screen displays a pre-determined
set of phone keys for accessing features, applications, and line appearances. Phone extensions
for autodialing can be also added and accessed with this feature.
The phone configuration is forced by the system administrator, and you cannot change the
mapping or labels of pre-configured keys.
Contact your system administrator if you need to replace, move, or relabel the pre-configured
keys.
Precedence call
You can override other calls by making a priority call with precedence. You can manually dial the
extension number or select the extension from Contacts or Recents. The precedence level is
valid for only one call session. The call precedence levels are:
• FO: Flash Override. Highest precedence.
• FL: Flash.
• IM: Immediate.
• PR: Priority.
• Routine: Lowest precedence. Routine is highlighted on the call session line if no call is made
within five minutes.
Advanced features
April 2020 Using Avaya J159 IP Phone SIP 82
Comments on this document? infodev@avaya.com