Related links
Presence icons on page 27
Retrieving a voice message
About this task
Use this procedure to listen to your voicemail messages.
Before you begin
• Ensure that the system administrator configures the voicemail for your extension.
• Obtain the user ID and password of your voicemail from your system administrator.
Procedure
1. To log in to your voicemail, press the Message button.
2. Follow the voice prompts to playback your voice messages.
Shared control
With the Shared Control feature, you can operate phones from the Avaya IX
™
Workplace Client
client and use high quality audio of the phone. Shared control is supported on all the Avaya J100
Series IP Phones models.
Phones must be registered with Avaya Aura
®
to establish a shared control connection. When you
log in to your phone and Avaya IX
™
Workplace Client in the shared control mode, you can control
the phone through Avaya IX
™
Workplace Client. A shared control session might not be established
if multiple devices are registered to the same user, depending on the client implementation.
The Shared Control feature must be activated by the administrator and configured on Avaya IX
™
Workplace Client.
Note:
This feature is available only in Avaya Aura
®
environment.
You can perform the following tasks on the Avaya J100 Series IP Phones:
• make a call
• answer a call
• place and resume a call on hold
• mute and unmute a call
• call transfer
Retrieving a voice message
April 2020 Using Avaya J159 IP Phone SIP 85
Comments on this document? infodev@avaya.com
To Next Page
Loading...
