Avaya J159 - Headset Profile

Procedure
1. During an active call, access the Features menu.
2. To start a trace, scroll to Malicious call trace, and press one of the following:
• Select
• Corresponding line button
An alerting tone or flashing LED signifies the trace is active. Hanging up deactivates MCT
Act.
Important:
Some countries, states, and localities have laws that determine if and under what
circumstances you can use Malicious Call Trace (MCT). Before using the MCT feature,
you must understand and comply with these laws.
Team Button
When the administrator configures the Team Button feature for your phone, you can do the
following:
• Monitor another phone to know whether calls are redirected to another phone.
• Monitor another phone to know whether that phone has an active call.
• Answer calls that ring on the monitored phone.
Use the Team Button soft key to:
• Make a speed dial call to the monitored phone. You can do this when the monitored phone is
not in use.
• Transfer an active call to the monitored phone.
The call redirection feature, Send All Calls, Call Forward, or ECF might be active on the monitored
phone. The monitoring phone can override call redirection when speed dialing or transferring an
active call to the monitored phone. The override feature ensures that the call made to the
monitored phone rings on the monitored phone and is not routed to the redirected number.
To override call redirection, the administrator must configure on Avaya Aura
®
Session Manager:
• The monitored phone setting that enables the monitoring phone to override call redirection
directly or through a choice provided to the user.
• The monitoring phone setting that enables the phone to override the call redirection feature
that is active on a monitored phone.
For more information to set the overriding permission on Avaya Aura
®
Session Manager, see
Administering Avaya Aura
®
System Manager.
Team Button
April 2020 Using Avaya J159 IP Phone SIP 87
Comments on this document? infodev@avaya.com