When you turn the ringer off, visual alerting is also turned off. When the ringer has been turned off,
the button's red lamp is lit. Pressing the button again turns the ringer on.
Related links
Programmable Button Features on page 133
Self-Administer Button
A button configured for this action can be used to access the Self Administer menu. This type of
button is not supported on J139 phones.
Related links
Programmable Button Features on page 133
Send All Calls Button
A button configured with this action can be used to switch 'do not disturb' on or off. When 'do not
disturb' is on, the button's red lamp is lit or a red warning icon is displayed. Pressing the button
again turns 'do not disturb' off.
Related links
Programmable Button Features on page 133
Suppress Digits Button
Masks the display of digits as you dial them on the phone. Dialed digits are replaced with an s
character. The button is used to switch the suppression on/off. When 'suppress digits' has been
set, the button's red lamp is lit. Pressing the button again cancels the suppression.
• If en-bloc dialing is active you still see the digits as you dial them. When you make the call
the digits are suppressed.
• When the option to suppress digits is used, the call is not recorded in the call log.
Related links
Programmable Button Features on page 133
Twinning Button
A button configured for this feature allows you to control your phone's mobile twinning operation.
Twinning on page 60
Programmable Feature Buttons
April 2020 J100 Series Phone User Guide 138
Comments on this document? infodev@avaya.com
To Next Page
Loading...
