Speaker Volume
While talking via the speaker, you can adjust the volume of the caller.
Procedure
1. Use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
•
If you set the volume to zero (off), the phone displays a icon.
Related links
Volume and Sound on page 153
Automatic Gain Control
When using automatic gain control (AGC), the phone tries to maintain a constant audio level even
if the incoming call changes between loud and quiet.
Procedure
1.
Press the button.
2. Use the cursor keys to select Settings.
3. Use the cursor keys to select Audio.
4. Use the cursor keys to select Automatic gain control.
5. Use the cursor keys to switch between Handset, Headset, or Speaker.
6. To change the highlighted setting, press Toggle.
7. When completed, press Save.
8. Press Back/Exit to exit the menus.
Related links
Volume and Sound on page 153
Default Handsfree Audio Path
By default, when you make a call or answer a call without lifting the handset, the audio is played
through the phone's speaker while you speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior so that the audio is played
through the headset by default rather than the speaker.
Speaker Volume
April 2020 J100 Series Phone User Guide 157
Comments on this document? infodev@avaya.com
To Next Page
Loading...
