Related links
System Administration on page 169
Checking the Time Server Status
For systems that automatically obtain the time from a time server, this option allows you to check
the current status of the time server and the information obtained from it.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
PHONE key and then press Features.
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select System Administration.
• This option is only present if you have been configured as a system phone user by your
system administrator.
• This menu is not supported on the J139.
4. Enter your security PIN (login code) and press Done.
5. Use the cursor keys to select Time Server Status.
6. The time server information is listed. It includes the address of the time server, the current
local time and the UTC time. If the phone system is configured for daylight savings then
the current amount of daylight savings being applied to the local time is also shown.
Related links
System Administration on page 169
Setting the Date
The process below can be used when the telephone system does not obtain the time and date
automatically. On systems that are configured to obtain the time automatically, the option for
checking the Time Server Status is available instead. See
Checking the Time Server Status on
page 170.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use the cursor keys to select Phone User.
System Administration
April 2020 J100 Series Phone User Guide 170
Comments on this document? infodev@avaya.com
To Next Page
Loading...
