Chapter 5: Call operations
Handling Outgoing calls
Making a call by using the dial mode
About this task
Use this procedure to make a call without lifting the handset or pressing Speaker.
Before you begin
Set the dialing mode on the phone to Auto or Manual.
Procedure
• If the dial mode is set to Auto, dial the required number of digits.
The phone initiates the call when the inter digit timer times out.
• If the dial mode is set to Manual, dial the number and press the Call softkey.
Related links
Setting the dialing mode on page 57
Making a call without using the dial mode
Procedure
1. Lift the handset or press Speaker.
2. Dial the number.
The phone starts a call when the inter digit timer times out.
Redialing a number
Before you begin
Ensure that the call history is not empty.
May 2018 Using Avaya J169/J179 IP Phone SIP in third-party call control setup 23
Comments on this document? infodev@avaya.com
To Next Page
Loading...
