2. If necessary, scroll down to MCT and press OK or just press the corresponding line button
to start the trace.
An alerting tone or flashing LED signifies the trace is active. Hanging up deactivates MCT.
Important:
Some countries, states, and localities have laws that determine if and under what
circumstances you can use Malicious Call Trace (MCT). Before using the MCT feature,
you must understand and comply with these laws.
Visual alert for an encrypted call
While using your phone, you can now see whether an incoming or an outgoing call is encrypted.
The secure status is indicated by the secure icon, a padlock, on the active call appearance.
Note:
The secure icon appears only if a two-party call is encrypted.
Activating EC500 for simultaneous ringing on multiple
phones
About this task
Using the EC500 feature, you can program your phone in such a way that the phone and your cell
phone rings simultaneously when there is an incoming call. With this feature, you can answer
office calls while you are away from your desk. The system administrator has to add your cell
phone number and program the desk phone.
Procedure
1. From the Phone screen, gain access to the Features screen.
2. Scroll to EC500 and press one of the following:
• Select
• OK
• Corresponding line button
Visual alert for an encrypted call
March 2018 Using Avaya J169/J179 IP Phones SIP 75
Comments on this document? infodev@avaya.com
To Next Page
Loading...
