Related links
Using Hunt Group Busy on page 78
Using Hunt Group Busy
About this task
Use the Hunt Group Busy buttons on the Features screen, to stop or start receiving calls from a
particular hunt group.
Procedure
1. To stop receiving calls from a particular hunt group, tap the corresponding Hunt Group
Busy button.
2. To turn off the Hunt Group Busy feature for a particular hunt group and start receiving calls,
tap the corresponding Hunt Group Busy button.
Related links
Hunt Group Busy on page 77
About forwarding calls
You can forward your incoming calls to another number or to voice mail. When the Forward button
light is on, one or more of the forwarding features are active. The forwarding features available on
your phone depend on the options your administrator has set. For more information about the
options available on your extension, contact your administrator.
Activating Send All Calls
About this task
When Send All Calls (SAC) feature is on, your incoming calls go directly to a predefined coverage
number, typically your voice mail. Incoming calls ring once at your extension and then go directly
to a number which is set by your system administrator. If the SAC feature is administered on your
phone, a Send All softkey appears on the Phone screen for idle calls.
Pressing Send All turns Send All Calls on. If it is already on, pressing Send All turns it off.
You can also turn Send All Calls on or off by using the phone Features list.
If you enabled the DND affects SAC option, the phone activates the SAC feature when you
manually change the presence status to DND.
Features
March 2018 Using Avaya J169/J179 IP Phones SIP 78
Comments on this document? infodev@avaya.com
To Next Page
Loading...
